Going through your house and looking for mold is something that every homeowner should do at least two or three times a year, especially since mold can start growing in as little as 48 hours after the spores land on something they like. Killing the mold is not the only problem you will have to deal with if you find it; removing the mold from the property is something else to be concerned with, since dead mold spores can still cause allergic reactions in some people. Depending on the severity of the allergy, these reactions can be a simple case of sneezing or as severe as requiring hospitalization. You can take antihistamines to help combat this, but no one should take medication if they do not have to.
There are a few places in your house that you need to inspect regularly for mold growth. These are areas of the house that naturally have a lot of moisture and these include the kitchen, bathroom, laundry room, and the basement.
The basement is somewhat humid because of its underground location, but there are things that you can do to add unnecessary humidity to it. Some people use the basement as a laundry room as well and this is fine, but you need to make sure that the dryer is properly vented to the outside of the house. Having an exhaust fan in the room will also help get rid of some of the excess moisture. One thing that you should really avoid doing at all costs is hanging up laundry to dry without proper ventilation.
The bathroom is one of the worst areas for mold in the house and this is generally due to flawed waterproofing. This could be cracked tiles on the floor, missing areas of grout or caulking, or mold growing on the ceiling because the humidity in the room is too high. This can be corrected by having an exhaust fan installed, just like in the basement. In fact, having these fans in all moist rooms of the home is recommended and the chances for mold growth will be greatly reduced.
Something to avoid having in the bathroom or another moist area of the home is carpet. Mold loves to grow in carpet and once the padding underneath it is contaminated, it has to be taken up and thrown away, because it cannot be cleaned.
The kitchen is another area where the floor and ceiling are the most at risk. Try to seal up and cracks in the flooring and make sure there is an exhaust system over the stove to get rid of steam before it hits the ceiling.
Jim Corkern is a writer and promoter of quality
water damage restoration and
mold remediation companies across the united states.
Thursday, September 27, 2007
Hardwood Deck Waterproofing
Every homeowner who has the space to build one in would love to have a fresh hardwood porch or one in the back to barbecue on, but those of us who already have one want to do whatever we can to protect it from the elements. Over the years your deck will suffer from different forms of precipitation and natural damage and protecting it from these is a little more difficult than from the regular wear and tear of feet running across it. Rain will cause the deck to crack and warp over time, but sealing it water tight with a chemical that can be purchased at almost any hardware or home improvement store will protect it for years to come.
The easiest way to protect your deck is by waterproofing it with a deck sealant, but you can do this yourself or hire someone to do it for you. Doing it yourself is not very difficult and you should be able to manage fine, so this is great for anyone who is on a budget, but if money is not a concern to you and your time is, hiring someone else may be the way to go.
If your deck is newly constructed, then you will want to wait at least 30 days before doing anything like this to the surface of it, since new lumber needs time to adjust to your climate and get rid of any oils and moisture that may already be inside it. If you want to put a stain on the deck, this is probably a good time to do it, since the sealant will prevent the deck from soaking up most liquids.
Clean everything off of the deck and scrub it before you do anything else, whether it’s applying the stain or the sealant. It needs to be as free of furniture, dirt, and other debris as possible. You can purchase a deck cleaning solution from your local hardware, home improvement, or department store and apply it yourself with a pump sprayer. Scrub it with a stiff bristled brush to get it as clean as you can and rinse it off with your water hose when you get finished. It is starting to look better already!
Follow the instructions on the deck sealant and this should include using a sprayer or a roller to apply it to the surface of the wood. You need to let it dry for a few days before walking on it, so start from the end of the deck furthest from a good entrance and work your way back.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
The easiest way to protect your deck is by waterproofing it with a deck sealant, but you can do this yourself or hire someone to do it for you. Doing it yourself is not very difficult and you should be able to manage fine, so this is great for anyone who is on a budget, but if money is not a concern to you and your time is, hiring someone else may be the way to go.
If your deck is newly constructed, then you will want to wait at least 30 days before doing anything like this to the surface of it, since new lumber needs time to adjust to your climate and get rid of any oils and moisture that may already be inside it. If you want to put a stain on the deck, this is probably a good time to do it, since the sealant will prevent the deck from soaking up most liquids.
Clean everything off of the deck and scrub it before you do anything else, whether it’s applying the stain or the sealant. It needs to be as free of furniture, dirt, and other debris as possible. You can purchase a deck cleaning solution from your local hardware, home improvement, or department store and apply it yourself with a pump sprayer. Scrub it with a stiff bristled brush to get it as clean as you can and rinse it off with your water hose when you get finished. It is starting to look better already!
Follow the instructions on the deck sealant and this should include using a sprayer or a roller to apply it to the surface of the wood. You need to let it dry for a few days before walking on it, so start from the end of the deck furthest from a good entrance and work your way back.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
Cleaning Up The Sewage From Your Home
Cleaning up the sewage in your home after it has been flooded is a pretty ugly experience, but unfortunately for some homeowners that live in parts of the United States where floods are common, it can be something that they have to go through at least once. While you can have a professional service clean up after the flood for you, you can save a substantial amount of money by doing a lot of it yourself. You can use this saved money to purchase new furniture, clothing, food, or anything else that you could need after the flood is over.
Flood waters can contain all kinds of things that can be hazardous to your health. This can include chemicals, sewage, soil, bacteria, viruses, and etcetera. These are things that you do not want to have in your home and doing your best to get them cleaned up, even if it means hiring a professional, is something you need to do. You need to purchase the protective equipment necessary to keep yourself from getting sick due to all the different things left behind by the water, but this will not be very much. You will need some latex gloves, a pair of plastic booties to cover your shoes, a roll of duct tape, and some disposable plastic coveralls. The duct tape will be used to cover the gaps between the gloves, the boots, and the suit so there is no way that the sewage can get to your skin.
There is not much that you can do to save all the furniture in your home after the flood is over. This is mainly upholstered furniture that has a lot of padding, though, so your wooden furniture should be fine. Padding in upholstered furniture will soak up the flood waters and everything that it contains, including soil, bacteria, and everything else. You can reupholster some items that have little padding and take this as an opportunity to replace fabrics that you do not care for any longer.
For the cleanup process, you will require at least two buckets, depending on whether you have someone help you clean up the rest of the house or not. Try to keep this at an even number, since you will need to work with the buckets in sets of two.
Take a mop and dip it into the bucket with the cleaning chemicals in it and begin scrubbing the floor. Scrub it thoroughly and dip the mop into the rinsing water. Do not put the mop back into the bucket with the cleaners until you rinse it first. You do not want to introduce sewage into the clean water.
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
Flood waters can contain all kinds of things that can be hazardous to your health. This can include chemicals, sewage, soil, bacteria, viruses, and etcetera. These are things that you do not want to have in your home and doing your best to get them cleaned up, even if it means hiring a professional, is something you need to do. You need to purchase the protective equipment necessary to keep yourself from getting sick due to all the different things left behind by the water, but this will not be very much. You will need some latex gloves, a pair of plastic booties to cover your shoes, a roll of duct tape, and some disposable plastic coveralls. The duct tape will be used to cover the gaps between the gloves, the boots, and the suit so there is no way that the sewage can get to your skin.
There is not much that you can do to save all the furniture in your home after the flood is over. This is mainly upholstered furniture that has a lot of padding, though, so your wooden furniture should be fine. Padding in upholstered furniture will soak up the flood waters and everything that it contains, including soil, bacteria, and everything else. You can reupholster some items that have little padding and take this as an opportunity to replace fabrics that you do not care for any longer.
For the cleanup process, you will require at least two buckets, depending on whether you have someone help you clean up the rest of the house or not. Try to keep this at an even number, since you will need to work with the buckets in sets of two.
Take a mop and dip it into the bucket with the cleaning chemicals in it and begin scrubbing the floor. Scrub it thoroughly and dip the mop into the rinsing water. Do not put the mop back into the bucket with the cleaners until you rinse it first. You do not want to introduce sewage into the clean water.
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
Subscribe to:
Posts (Atom)
